Filter
Top Products
92
Settings For details on the operation 1 page 80
Shooting Settings — Shooting Settings 2
The default settings are marked with .
When the camera is rotated to shoot a portrait (vertical) image, the camera records its position
change and displays the image in the portrait position.
• Black is displayed to the left and right of vertical orientation images.
• Depending on the shooting angle of the camera, the orientation of the image may not be recorded
correctly. If an image is not recorded in the correct orientation, you can rotate the image, following the
procedure on page 78.
• When (Underwater) mode is selected in the Scene Selection mode, you cannot use [Auto
Orientation].
Displays the recorded image on the screen for approximately two seconds immediately after
shooting a still image.
• If you press the shutter button halfway down, the recorded image display disappears and you can
immediately shoot the next image.
• You cannot use Auto Review when:
– (Extra High Sensitivity) mode is selected in the Scene Selection mode.
– During burst/bracket shooting
– When [Auto] or [Advanced] is selected in [Scene Recognition].
Auto Orientation
On
Records the image with the correct orientation.
Off
Does not use Auto Orientation.
Auto Review
On
Uses the Auto Review.
Off
Does not use Auto Review.