Filter
Top Products
51
Using the shooting functions
Shooting menu For details on the operation 1 page 39
• To avoid blurring of images, hold the camera firmly until the shutter is released. It usually takes a second
after you press the shutter button. Be also sure not to allow the subject to move during this period.
• Red-eye reduction may not produce the desired effects. It depends on individual differences and
conditions, such as distance to the subject, or if the subject looked away from the pre-strobe. In such a
case, you can correct the red-eye using [Retouch] in the viewing menu after shooting (page 58).
• When the Face Detection function is not used, the red-eye reduction flash will not strobe even when
[Auto] is selected.
Adjusts the contrast of the image.
Adjusts the sharpness of the image.
(Auto)
The red-eye reduction flash strobes whenever necessary, only
when using the Face Detection Function.
(On)
The flash always strobes to reduce the red-eye phenomenon.
(Off)
Does not use Red Eye Reduction.
Contrast: Adjusting the contrast
(–)
Toward –: Reduces the contrast.
(Normal)
(+)
Toward +: Enhances the contrast.
(DRO)
Adjusts the contrast of the image automatically.
• When using flash, if [Metering Mode] is set to [Center] or
[Spot], the contrast will not be adjusted automatically.
Sharpness: Adjusting the sharpness
(–)
Toward –: Softens the image.
(Normal)
(+)
Toward +: Sharpens the image.