Filter
Top Products
Table of
contents
Operation
Search
MENU/Settings
Search
Index
156
GB
The date and time are not displayed on the LCD screen.
• While shooting, the date and time are not displayed. They are displayed only during playback.
Cannot insert dates on images.
• This camera does not have a feature for superimposing dates on images. By using “PMB”, you can
print or save images with the date (page 138).
The F value and shutter speed flash when you press and hold the shutter button
halfway down.
• The exposure is incorrect. Correct the exposure (page 44).
The LCD screen is too dark or too bright.
• Adjust the brightness of the backlight (page 18).
The image is too dark.
• You are shooting a subject with a light source behind the subject. Select the Metering Mode (page 60)
or adjust the exposure (page 44).
The image is too bright.
• Adjust the exposure (page 44).
The image colors are not correct.
• Set [Color Mode] to [Normal] (page 72).
• Set [Color Filter] to [Off] (page 73).
• Adjust the White Balance (page 58).
Noise appears in the image when you view the screen in a dark place.
• The camera is attempting to increase the visibility of the screen by temporarily brightening the image
under conditions of low illumination. There is no effect on the recorded image.
The eyes of the subject come out red.
• Set [Red Eye Reduction] to [Auto] or [On] (page 69).
• Shoot the subject at a distance closer than the flash range using the flash.
• Light the room and shoot the subject.
• Retouch the image using [Retouch] t [Red Eye Correction] in viewing menu, or correct using
“PMB”.
Dots appear and remain on the screen.
• This is not a malfunction. These dots are not recorded.
Cannot shoot images in succession.
• The internal memory or “Memory Stick Duo” media is full. Delete unnecessary images (page 49).
• The battery level is low. Insert charged battery pack.
The same image is shot several times.
• [REC Mode] is set to burst or bracket, set to [Normal] (page 42). Or, [Scene Recognition] is set to
[Advanced] (page 62).