Filter
Top Products
Table of
contents
Operation
Search
MENU/Settings
Search
Index
32
GB
Sweep Panorama
Allows you to create a panoramic image from composed images.
You can create both up and down, both right and left panoramic images.
1 Set the mode dial to (Sweep Panorama)
Hold the camera at the position where you can see the LCD
screen clearly.
2 Fully press the shutter button
3 Pan the camera following the indication on
the screen
The guidance bar is displayed as camera moves.
When a guidance bar reaches to the end, the shooting
stops and panoramic images are recorded.
• If you cannot pan the camera across the entire subject within the given time, a gray area occurs in the
composed image. If this happens, move the camera fast to record a full panoramic image.
• Since several images are stitched together, the stitched part will not be recorded smoothly.
• You cannot create panoramic images in the following situations:
– You pan the camera too fast or too slow
– There is too much camera shake
– You pan the camera in a different direction from the setting
• Under low light conditions, panoramic images may be blurred.
Notes
This part will not be taken
Guidance
bar
zChanging the shooting direction or image size of a
panoramic image
Shooting Direction: MENU t [Shooting Direction] t z on the control button t
select [Right], [Left], [Up] and [Down] t z
Image Size: MENU t [Image Size] t z on the control button t select
[Standard] or [Wide] t z
Continued r