Filter
Top Products
Cleaning the lens
Do not use a cleaning solution containing organic solvents, such as thinner, or benzine.
When cleaning the lens surface, remove dust with a commercially available blower. In case
of dust that sticks to the surface, wipe it off with a soft cloth or tissue paper slightly moistened
with lens cleaning solution. Wipe in a spiral pattern from the center to the outside. Do not
spray lens cleaning solution directly onto the lens surface.
Cleaning the flash
Clean the flash surface before use. The heat of the flash emission may cause dirt on the flash
surface to start smoking or burning. Wipe the flash surface with a soft cloth to remove dirt or
dust, etc.
Cleaning the product surface
Clean the product surface with a soft cloth slightly moistened with water, then wipe the surface
with a dry cloth. To prevent damage to the finish or casing:
Do not expose the product to chemical products such as thinner, benzine, alcohol,
disposable cloths, insect repellent, sunscreen or insecticide.
Do not touch the product with any of the above on your hand.
Do not leave the product in contact with rubber or vinyl for a long time.
Cleaning the monitor
If oil from your hand or hand cream, etc., remain on the monitor, the original coating may
become easily removable. Wipe oil or hand cream off as soon as possible.
If you wipe the monitor firmly using tissue paper, etc., the coating may be scratched.
If the monitor becomes dirty with fingerprints or dust, gently remove the dust from the
surface, and then clean the monitor using soft cloth, etc.
[177] How to Use Precautions/This product Number of recordable still images
and recordable time of movies
Number of still images
The number of still images may vary depending on the shooting conditions and the memory
card.
[ Image Size]: [L: 20M]
When [ Aspect Ratio] is set to [4:3]*
Standard