Filter
Top Products
：
The product can acquire the current location information.
：
An error occurred with the GPS function. Turn off the product, and turn it on again.
To receive a GPS signal
Proper triangulation is not possible indoors or near tall buildings. Use the product in an open
area outside, and turn the product off and on again.
It may take from ten seconds to several minutes to acquire the location information.
You can shorten the time of triangulation by using the GPS assist data.
Note
It may take from ten seconds to several minutes to acquire the location information when you
turn on this product. If you shoot images before the product acquires the location information,
the information is not recorded on the images. To record a correct location information, first
make sure the product receives the GPS signal, then shoot the images.
During take off and landing of an airplane, set [Airplane Mode] to [On].
Use GPS in accordance with the regulations of the countries or regions where you use the
product.
[105] How to Use Changing settings Setup menu
GPS Auto Time Cor. (DSC-HX60V)
The product acquires the time information using GPS while the product is turned on, and the
information is used for maintaining the accurate time setting. The product adjusts the time
setting when it is turned off.
1. MENU → (Setup) → [GPS Settings] → [GPS Auto Time Cor.] → desired setting.
Menu item details
On:
Uses GPS auto time correction.
Off (default setting):
Does not use GPS auto time correction.
Note
[GPS Auto Time Cor.] is not available when [GPS On/Off] is set to [Off].