Filter
Top Products
76
The picture is out of focus.
•
Your camera is not in macro recording mode when
you shoot a subject that is about 3 to 25 cm (1 3/16
to 9 27/32 inches) from the lens.
t
Set the macro recording mode (page 53).
•
The focus preset is selected.
t
Cancel the function (page 52).
The resizing function does
not work.
•
You cannot resize moving images, text images, Clip
Motion and uncompressed images.
Images recorded in TEXT
mode are blurry.
•
Light is not striking the subject evenly.
t
Adjust so that the lighting strikes the subject
evenly.
You cannot record images
in TEXT mode.
•
The mode dial is set to .
t
Set the mode dial to .
You cannot display a print
mark.
•
You cannot display print marks on moving images,
text images and Clip Motion images.
The picture is noisy.
•
Your camera is placed near a TV or other
equipment that uses strong magnets.
t
Move your camera away from the TV, etc.
The picture is too dark.
•
You are shooting a subject with a light source
behind the subject.
t
Adjust the exposure (page 53).
•
The brightness of the LCD screen is too low.
t
Adjust the brightness of the LCD screen
(page 70).
The flash does not work.
•
The flash is set to .
t
Set the flash to auto (no indicator) or
(page 24).
•
The mode dial is set to .
t
Set the flash to .
•
The mode dial is set to , SETUP or (MPEG
MOVIE).
t
Set it to .
The date and time are
recorded incorrectly.
•
The date and time are not set correctly.
t
Set the correct date and time (page 15).
Vertical streaks appear
when you are shooting a
very bright subject.
•
The smear phenomenon is happening.
t
This is not a malfunction.
Symptom Cause and/or Solution