Filter
Top Products
Table of
contents
Operation
Search
MENU/Settings
Search
Index
60
GB
• The Scene Recognition function does not operate when you shoot images using Digital Zoom.
• When the shooting mode is set to burst, or when the Smile Shutter function is activated, Scene
Recognition is fixed to [Auto].
• The available flash settings are [Auto] and [Off].
• (Twilight using a tripod) scenes sometimes cannot be recognized in an environment where vibrations
are transferred to the camera even though it is fixed on a tripod.
• Sometimes a slow shutter results when a scene is recognized as a
(Twilight using a tripod). Keep the
camera still during shooting.
• The Scene Recognition icon appears regardless of the [Shooting Display Settings].
• These scenes may not be recognized depending on the situation.
Notes
zImages you can shoot with [Advanced]
In [Advanced] mode, the camera shoots two images consecutively with the settings
differing as follows when it recognizes (Twilight), (Twilight Portrait), (Twilight
using a tripod), (Backlight) or (Backlight Portrait) scenes, which tends to blur.
You can select the desired image from the two images shot.
* When flash is set to [Auto].
First Image* Second Image
Shoot in Slow Synchro Shoots with sensitivity increased and shake
reduced
Shoot in Slow Synchro with the face
which the flash strobes on as guide
Shoots with sensitivity increased with the face as
guide and shake reduced
Shoot in Slow Synchro Shoots with even slower shutter speed without
increasing sensitivity
Shoots with the flash Shoots with the brightness and contrast of the
background adjusted (DRO plus)
Shoots with the face which the flash
strobes on as guide
Shoots with the brightness and contrast of the
face and the background adjusted (DRO plus)
zWhat is the Anti Blink function?
When set to [Advanced], the camera automatically shoots two images consecutively* when
it recognizes (Portrait). The camera will select, display, and record the image which the
eyes are not blinked automatically. If the eyes are closed in both images, the message
“Blinked eye detected” is displayed.
* except when the flash strobes/when the shutter speed is slow