Filter
Top Products
Table of
contents
Operation
Search
MENU/Settings
Search
Index
65
GB
Red Eye Reduction
The flash strobes two or more times before shooting to reduce the red-eye phenomenon when
using the flash.
1 Lower the lens cover to switch to shooting mode.
2 t (Red Eye Reduction) t desired
mode
• You cannot select [Red Eye Reduction] in Sweep Panorama, Movie Mode, Anti Motion Blur, Hand-held
Twilight, Smile Shutter or Easy Mode.
• To avoid blurring of images, hold the camera firmly until the shutter is released. It usually takes a second
after you press the shutter button. Be also sure not to allow the subject to move during this period.
• Red Eye Reduction may not produce the desired effects. It depends on individual differences and
conditions, such as distance to the subject, or if the subject looked away from the pre-strobe.
• If you do not use the Face Detection function, Red Eye Reduction does not work, even when you select
[Auto].
(Auto) When the Face Detection function is activated, the flash strobes
automatically to reduce the red-eye phenomenon.
(On) The flash always strobes to reduce the red-eye phenomenon.
(Off) Does not use Red Eye Reduction.
Notes
zWhat causes the red-eye phenomenon?
Pupils become dilated in dark environments. Flash light is reflected off the blood vessels at
the back of the eye (retina), causing the “red-eye” phenomenon.
Other ways to reduce red-eye
• Select (High Sensitivity) mode in Scene Selection. (The flash is automatically turned to [Off].)
• When the eyes of the subject turn out red, correct the image with [Retouch] t [Red Eye
Correction] on the viewing menu or with the supplied software “PMB”.
Camera
Eye
Retina