Filter
Top Products
Table of
contents
Operation
Search
MENU/Settings
Search
Index
62
GB
zRegistering the priority face (Selected-face Memory)
Normally the camera automatically selects the face to focus on according to the [Face
Detection] setting, but you can also select and register a face to be given priority.
• When you remove the battery from the camera, the face registration is reset.
• When the registered face disappears from the LCD screen, the camera returns to the setting selected
by [Face Detection]. When the registered face is shown on the LCD screen again, the camera
focuses on the registered face.
• It may not be possible to detect the registered face correctly depending on the surrounding
brightness, the subject’s hairstyle, etc. In this case, register the face again under the conditions
where the image will be shot.
• When the Smile Shutter function is used with the Face Detection frame registered, Smile Detection
is performed only on the registered face.
• In Easy Mode, the priority face cannot be registered.
1Touch a face you want to register as the priority face during
Face Detection.
The selected face is registered as the priority face, and the
frame changes to an orange-colored .
2Each time you touch a different face, that face is registered as
the priority face.
3To cancel face registration, touch .