Filter
Top Products
Chapter 6 Maintenance 6-7
6
10Hold down the REW button to rewind the tape for a while, then
press the PLAY button. Check that the rewind and playback
functions operate normally.
11Press the STOP button and press the F FWD button. Check that the
fast forward function operates normally.
(2) Testing the automatic audio level adjusting
functions
1 Set the AUDIO SELECT CH-1 / CH-2 switches to AUTO.
2 Set the AUDIO IN switches to FRONT.
3 Aim the microphone connected to the MIC IN connector at a
suitable sound source. Check that the level indications for both
channels correspond to the sound level.
(3) Testing the manual audio level adjusting functions
1 Set the AUDIO IN switches to FRONT.
2 Set the AUDIO SELECT CH-1 / CH-2 switches to MAN.
3 Adjust the MIC AUDIO LEVEL control on the front of the
camcorder. Check that the level indications increase as the control is
turned counterclockwise.