Filter
Top Products
2-8 Chapter 2 Locations and Functions of Parts and Controls
2
5 AUDIO LEVEL CH-1 / CH-2 (audio channel 1 and channel 2
recording level) controls
These controls adjust the audio level of channels 1 and 2 when you set
the AUDIO SELECT CH-1 / CH-2 switches to MAN.
6 AUDIO SELECT CH-1 / CH-2 (audio channel-1 and channel-2
select) switches
These switches set the audio level adjustment for channels 1 and 2 to
MANUAL or AUTO.
7 AUDIO IN (audio input) switches
These switches select the audio input signals for audio channels 1 and 2.
The input signal source is either:
FRONT : The input signal source is the MIC IN connector.
REAR : The input signal source is the AUDIO IN CH-1 / CH-2
connectors.
8 CUE IN (cue track input) switch
This switch selects the input signals for recording the cue track.
CH-1 : Channel 1 input signal
MIX : Mixed input signal of channels 1 and 2
CH-2 : Channel 2 input signal
9 AUDIO OUT (audio output) connector (XLR type, 3-pin, male)
This connector outputs the sound selected by the MONITOR switch.