Filter
Top Products
Chapter 4 Adjustments and Settings for Recording 4-27
4
4-5-2 Setting the Time Code
If you are using the time code and the user bits, set the user bits first. If
you set the time code first, it will not be correct because the time code
generator will stop while the user bits are being set.
The time code setting range is from 00 : 00 : 00 : 00 to 23 : 59 : 59 : 29
(hour : minute : second : frame) for the DVW-700 / 700WS, or to 23 : 59
: 59 : 24 for the DVW-700P / 700WSP.
Follow the procedure below to set the time code.
Setting the time code
1 Set the DISPLAY switch to TC.
(Continued)
Illustration : DVW-700 / 700WS (for the NTSC broodcast system)