Filter
Top Products
21
C. SYNC
TR G
.
N
NT. CTRL
H. PHASE
G SYNC
D–SUB V
D–SUB S
EXT. CTRL (BNC)
FREEZE
SC PHASE R
>
:A
±
00
Y / C
PAGE 3 : NOR
scan
±
00
0
ON
I
ough
F
ine
ideo
ync
II
The following tables shows the PAGE 3 menu items, their
contents and reference pages.
Item Content of settings Ref. page
PAGE 3 menu
This section describes in detail items on PAGE 3 menu.
Adjusts the difference in phase
between the subcarrier and
horizontal synchronization during
external synchronization.
Adds a sync signal to the G (green)
channel of the RGB output.
H.PHASE
SC PHASE
G SYNC
Outputs the video signal from the
RGB/SYNC (D-sub)
connector.
D-SUB Video
D-SUB Sync Outputs sync signal from the
RGB/SYNC (D-sub)
connector.
Selects the EXT CTRL signal input
(sync signal/external pulse signal)
Selects the memory mode (F/F or
F/S)
Selects how to capture the image
into memory (external pulse signal/
FREEZE button on the rear
panel).
MODE
a)
FREEZE
EXT.CTRL (BNC)
a) This item appears when “FREEZE” is set to “EXT.CTRL”.
LEVEL
This item appears when “DETAIL” is set to “ON”.
Adjusts the sharpness of the subject outlines within the
range from -99 to +99, when DETAIL is set to ON.
Adjusting direction Outline of the image
+ Sharper with more detail on the image
outline.
− Softener with less detail.
By pressing the DATA UP and DATA DOWN buttons
together, the values are reset to ±00
22
22
22
23
23
23
23