Filter
Top Products
23
D-SUB Sync
Selects the output sync signal of RGB/SYNC
connector (D-sub 9-pin).
Selection Output sync signal
Selection Input signal
TRIG.IN
Control signal for the built-in memory and external
trigger shutter.
Sync signal for synchronizing the camera operation
with the reference signal.
FREEZE
Selects the control signal for capturing the image to the
built-in memory.
Selection Control signal
INT.CTRL
Enables the FREEZE button on the rear panel to
capture the image to the built-in memory.
The external pulse signal is used to capture the image
to the built-in memory.
EXT.CTRL
MODE
This item appears when “FREEZE” is set to “EXT.CTRL”.
Selects how to control the unit using the external pulse.
Selection Control method
F/F Whenever an external pulse is input, the image is
captured to memory, replacing the previously
captured image.
F/S When an external pulse is input, the image is captured
to memory replacing the previously captured image,
and the captured image is output as a still image.
When the next external pulse signal is input, the live
image shot with the camera is output. These
operations are repeated cyclically whenever external
pulses are input.
C.SYNC Composite SYNC signal
WEN
WEN signal. The WEN signal is output to peripheral
equipment as a trigger pulse.
Note
HD signal. When HD is selected, “D-SUB Video” is
automatically set to “VD”.
EXT. CTRL (BNC)
Selects the input signal to the EXT CTRL connector on the
rear panel.
GENLOCK
Connect the camera to peripheral equipment after
completing all of menu settings.
HD