Filter
Top Products
52
The unit outputs a write enable control signal (WEN) with
the video signal so as to enable a printer or digital still
recorder to capture the image to memory.
For details on remotely controlling the operation of the printer or
digital still recorder, refer to the manuals supplied with them.
Connection With a Printer/Digital Still Recorder
To set up the system, perform the following settings on the
menus.
• Set “G SYNC” on PAGE 3 menu to “ON”.
• Set “D-SUB Sync” on PAGE 3 menu to “WEN”.
For details on menu settings, see “G SYNC” on page 22 and “D-
SUB Sync” on page 23.
VIDEO OUT
EXT CTRL
DC IN/
REMOTE
CCU
LENS
MENUFUNCTIONDATA
UP
WHITE
BARS
RGB/SYNC
VBS
SCAN
DOWN
FREEZE
SOURCE
1
2
CCMC-9DSMN cable
Remote
connector
Video input
connector
Video input
connector
75Ω coaxial cable
Video monitor, VCR, etc.
DC IN/VBS
CCDC-5/10/25/50A/100A cable or
CCMC-12P02/05/20/25 cable
CAMERA
(4-pin or 12-pin)
Set the MODE
selector to the “1”
position.
AC IN
Power cord
RGB/SYNC
DXC-9100P
Video output connector
CMA-D2CE/D2MDCE
camera adaptor