Sony FDR-AX100E Camcorder User Manual


 
The maximum continuous recordable time of a movie is about 13 hours.
When an AVCHD movie file exceeds 2 GB, the next movie file is created automatically.
The following states will be indicated if data is still being written onto the recording media
after recording has finished. During this time, do not apply shock or vibration to this product,
or remove the battery pack or AC Adaptor.
Access lamp is lit or flashing
The media icon in the upper right of the LCD monitor is flashing
The LCD monitor of this product can display recording images across the entire monitor (full
pixel display). However, this may cause slight trimming of the top, bottom, right, and left
edges of images when played back on a TV which is not compatible with full pixel display. It
is recommended you record images with [Grid Line] set to [On] using the outer frame of
[Grid Line] as a guide.
While recording XAVC S 4K movies, you cannot output movies to an external monitor via an
HDMI/video connection. Only the on-screen display is output (models with the 4K
functionality).
Hint
When [Dual Video REC] is set to [On], this product records an XAVC S movie and an MP4
movie simultaneously, or records an AVCHD movie and an MP4 movie simultaneously.
In the default setting, [Dual Video REC] is set to [Off].
How to Use
Recording Recording movies/photos
Shooting photos
Shoot photos.
1. Remove the lens cap.
2. Open the LCD monitor of this product to turn the power on. Press the / (Shooting
Mode) button to select the photo recording mode.
You can also select the photo recording mode by selecting [MODE] on the LCD
monitor.
You can also turn on this product by pressing POWER or by pulling out the viewfinder.
36