Filter
Top Products
49
Using the Menu
z Tips
• You can also operate by pressing PHOTO on
the Remote Commander (p. 108).
You can select the maximum zoom level in
case you want to zoom to a level greater
than 10 × (the default setting) while
recording on a tape. Note that the image
quality decreases when you are using the
digital zoom.
B OFF
Up to 10 × zoom is performed optically.
20 ×
Up to 10 × zoom is performed optically,
and after that, up to 20 × zoom is
performed digitally.
80 × (HDR-HC5)
Up to 10 × zoom is performed optically,
and after that, up to 80 × zoom is
performed digitally.
You can compensate for camera shake (The
default setting is [ON]). Set
[STEADYSHOT] to [OFF] ( ) when
using a tripod (optional), then the image
becomes natural.
When using an optional conversion lens,
use this function to record using the
optimum compensation for camera shake
for each lens.
B OFF
Select this when the conversion lens
(optional) is not used.
WIDE CONV. ( )
Select this to use the wide conversion lens
(optional).
TELE CONV. ( )
Select this to use the tele conversion lens
(optional).
You can select a menu item to assign to the
CAM CTRL dial. For details, see page 27.
When recording, set to [ON] to capture
wider range of colors.
Various colors such as the brilliant color of
flowers and turquoise blue of the sea can be
more faithfully reproduced.
b Notes
• Set [X.V.COLOR] to [ON] only when the
recorded content will be played back on an
x.v.Color-compliant TV. Otherwise, set to
[OFF] (the default setting).
• If the movie recorded with this function [ON] is
played back on a non-x.v.Color-compliant TV,
the color may not be reproduced correctly.
• [X.V.COLOR] cannot be set to [ON] when:
– Recording in DV format
– A movie is being recorded.
DIGITAL ZOOM
STEADYSHOT
CONV.LENS
The right side of the bar shows the digital
zooming factor. The zooming zone
appears when you select the zooming
level.
DIAL SET (HDR-HC7)
X.V.COLOR