Filter
Top Products
100
E:\SONY\2659814111\01GB07TBS_E.fm
DCR-HC36E/HC44E/HC46E/HC94E/HC96E
2-659-814-11(1)
• In the following settings, still images cannot be recorded on a “Memory Stick Duo” during
tape recording.
– [PROGRES.REC] (DCR-HC94E/HC96E)
– [SMTH INT.REC] (DCR-HC44E/HC46E/HC94E/HC96E)
• For DCR-HC36E:
You cannot record still images on the “Memory Stick Duo” using [WIDE SELECT] mode
(p. 50).
The recording angle differs depending on the POWER switch setting position
(DCR-HC44E/HC46E/HC94E/HC96E).
• The recording angle when the POWER switch is set to CAMERA-MEMORY is wider than
when it is set to CAMERA-TAPE.
You cannot record a smooth transition on a tape from the last recorded scene
to the next.
• Perform END SEARCH (p. 35).
• Do not remove the cassette. (The picture will be recorded continuously without a break even
when you turn the power off.)
• Do not record pictures in SP mode and LP mode on the same tape.
• Avoid stopping then recording a movie in the LP mode.
The shutter sound is not heard when you record a still image.
• Set [BEEP] to [ON] (p. 64).
The internal flash does not work (DCR-HC94E/HC96E).
• You cannot use the internal flash with:
– Tape recording
– [SUPER NS]
– [COLOR SLOW S]
– [D. EFFECT]
– [PROGRES.REC]
–[BURST]
• Even if auto flash or (Auto redeye reduction) is selected, you cannot use the internal flash
with:
– NightShot
– [SPOTLIGHT], [SUNSET&MOON], and [LANDSCAPE] of [PROGRAM AE]
–[EXPOSURE]
– [SPOT METER]
The external flash (optional) does not work (DCR-HC94E/HC96E).
• The power of the flash is not turned on, or the flash is not attached correctly.
[END SEARCH] does not work.
• Do not eject the cassette after recording (p. 35).
• There is nothing recorded on the cassette.
Troubleshooting (Continued)