Filter
Top Products
Table of
contents
Operation
Search
Settings
Search
Index
13
GB
Inserting the battery pack
1 Slide the lock lever until the yellow
mark can be seen, then open the
cover.
2 Insert the battery pack.
Make sure the direction of the battery pack is correct,
then insert it pushing against the battery ejection lever,
until the lever locks.
3 Close the cover.
Close the cover properly, so as the yellow mark
on the lock lever is not visible.
Lock lever
Battery
ejection lever
zTo remove the battery pack
Open the cover and slide the battery ejection lever, then remove the battery pack.
zTo set Auto Power Off function
Select [A.OFF] from the [SETUP] t [CONFG] screen, then set the Auto Power Off
function. The default setting is [60sec]. Change the setting as necessary.
For details, see “Auto Power Off” (page 39).
Continued r