Filter
Top Products
Troubleshooting Troubleshooting Batteries/power sources
The power abruptly turns off.
Use the AC Adaptor.
In the default setting, this product turns itself off when no operations are performed for more
than about 2 minutes ([Power Save]). Change the setting of [Power Save], or turn on the
power again.
Charge the battery pack.
Troubleshooting Troubleshooting Batteries/power sources
The POWER/CHG (charge) lamp does not light while the
battery pack is being charged.
Turn off this product.
Attach the charged battery pack to this product correctly.
Connect the power cord (mains lead) to a wall outlet (wall socket) properly.
The battery charge is completed.
Troubleshooting Troubleshooting Batteries/power sources
The POWER/CHG (charge) lamp flashes while the battery
pack is being charged.
When the battery is being charged using the Built-in USB Cable, disconnect the Built-in
USB Cable and connect it again.
If the temperature of the battery pack is too high or too low, you may not be able to charge
it.
Attach the charged battery pack to this product correctly. If the problem persists, disconnect
the AC Adaptor from a wall outlet (wall socket) and contact your Sony dealer. The battery
pack may be damaged.
Troubleshooting Troubleshooting Batteries/power sources
173