Filter
Top Products
52
US
4
Select the desired operation
when the highlight playback
finishes.
A: The camcorder plays the Highlight
Playback scenes again.
B
: You can save the Highlight
Playback scenes in standard definition
image quality (STD).
C
: You can change the settings for
Highlight Playback.
To change the settings for Highlight
Playback
You can change the Highlight Playback
settings by selecting [Highlight Setting]
on the screen after Highlight Playback has
finished.
You can also change the setting by selecting
while the camcorder is playing highlight
scenes.
[Playback Range]
You can set the playback range (starting and
ending date) of the Highlight Playback.
[Theme]
You can select a theme for Highlight Playback.
[Music]
You can select music.
[Audio mix]
The original sound is played back with the
music.
[Length]
You can set the length of the Highlight Playback
segment.
[Highlight Point]
You can set the points in a movie or photo that
will be used in a Highlight Playback. Play the
desired movie, and select
. Or
play the desired photo and select
.
appears on the movie or photo that is used in a
Highlight Playback.
To erase the points, select
[Clear All
Points].
Notes
Highlight Playback scenes will change each time
you select a Highlight Playback.
The [Playback Range] setting is cleared when
the Highlight Playback stops.
After the music file is transferred to the
camcorder, if you cannot play the music,
the music file may be damaged. Delete the
music file by selecting
[Setup]
[
Playback Settings] [Empty Music], then
transfer the music file again. You can restore the
music data recorded on your camcorder at the
default using “Music Transfer.” For operating
instructions, see “Music Transfer” help.
If the Highlight Playback function was started
from the Map View screen, [Highlight Point]
cannot be set. However, if the Highlight
Playback function was started from the Event
View screen and you set the [Highlight Point],
the point can take effect on the Map View also
(HDR-TD20V).
The audio used for the Highlight Playback will
be converted to 2ch stereo.
When you connect the camcorder to an
external device, such as a TV, and watch
Highlight Playback or Highlight Scenario, these
images do not appear on the LCD screen of the
camcorder.
Adding your desired music: “Music Transfer”
(p. 63)