Filter
Top Products
Chapter 10
Setup Menus
Chapter 10
Setup Menus 10-23
Item number Item name
Settings
703 BLANK LINE SELECT
(Invalid in 24PsF or
23.98PsF mode)
Switch blanking on or off for individual lines in the vertical blanking interval of the
SD video signal. The Y/C signal and odd/even fields are blanked simultaneously.
Menu items in the range 700 to 799, relating to video control
Sub-Item
0 ALL LINE - - - : Specify the blanking for each line separately.
BLANK: Regardless of the setting of other sub-items, blank all lines which can be
specified in this menu item.
THROU: Regardless of the setting of other sub-items, switch off blanking for all
lines which can be specified in this menu item.
12 ...
19
LINE 12 ... LINE
19
In 59.94i,
29.97PsF
mode
Specify blanking for lines 12 to 19.
BLANK : Carry out blanking.
THROU: Switch off blanking.
In 50i, 25PsF
mode
20 LINE 20 Specify blanking for line 20.
BLANK : Carry out blanking.
HALF: Carry out half-blanking.
THROU: Switch off blanking.
a) The “Y-add” function is a circuit operation to interpolate
the video signal vertically during jog or variable speed
playback for the purpose of reducing the vertical
movement of the playback picture.
707
FORCED VERTICAL
INTERPOLATION OFF
The “Y-add”
a)
function is normally switched on automatically during jog or variable
speed playback. This item selects whether or not to force the “Y-add” function
off.
AUTO : Automatically switch the “Y-add” function on.
OFF: Force the “Y-add” function off.
709 CAV LEVEL FORMAT
(Valid only in 59.94i or
29.97PsF mode)
Select whether the analog component output should be D-1 or Betacam.
Sub-Item
OUTPUT CAV
LEVEL
0 Select the analog component output format.
B-CAM : Betacam
D1: D-1
Format Color bars Y video Y sync R–Y/B–Y
D-1 CAV 100/0/100/0 700 mV 300 mV 700 mV
Betacam 100/7.5/77/7.5 714 mV 286 mV 700 mV
(Continued)
705 EDGE SUBCARRIER
REDUCER MODE
(HDW-M2000/M2000P
only. Invalid in 24PsF or
23.98PsF mode.)
During recording and playback of a composite signal, in the playback circuit the
edge subcarrier reducer (ESR) is automatically switched on or off according to
the VTR operation. When recording a “Non-Standard” signal, for example, if the
color edges are not as good as with a proper signal, the ESR can be forced on.
This item makes this selection.
AUTO : ESR is switched on and off automatically.
ON: ESR operation is forced on.
9 ...
22
LINE 9 ... LINE 22 Specify blanking for lines 9 to 22.
BLANK : Carry out blanking.
THROU: Switch off blanking.
23 LINE 23 Specify blanking for line 23.
HALF : Carry out half-blanking.
THROU: Switch off blanking.