Filter
Top Products
Chapter 2 Basic Operations
2-4 Chapter 2 Basic Operations
Switching the Pictures
The number keys of the cameras whose pictures can be monitored flash in
green.
To select the picture(s) for monitoring, use the flashing camera number
keys or the CURSOR V/v/B/b keys.
For connections and Image Control menu operation, see Chapter 5 “Connections
and Preparations.”
To select a specific camera
Press the number key corresponding to the camera to be monitored.
The key then flashes in amber, and the picture of the selected camera is
displayed on the full screen.
Press the same key again to return to the pervious condition.
To select a divided screen
Multiple camera pictures can be monitored by selecting the screen division
mode.
To change the structure
Press the V or v key.
Each time you press either of the keys, the display switches to the next of
night patterns, from the full screen to 16-division mode.
To change the pages
Press the B or b key.
The pages are cyclically switched.
To automatically switch pages
The pages of the structure selected using the V or v key are automatically
switched at the cycle specified in the range of 1 to 60 seconds.
Set MONITOR to AUTO on the Image Control menu.
For the settings, see Chapter 5 “Connections and Preparations.”
Monitoring Picture
CURSOR V/v/B/b keys Camera number keys
S
DIGITAL SURVELLANCE RECORDER HSR-1
DIGITAL
TIMELAPSE
CONTROL-S
REC
EJECT
FRAME STOPFRAMEREC
F FWDPLAYREW
‚
§
·º
¶π® æ
LOCK
TIME
SEARCH
ALARM
SEARCH
CURSOR
MENU
SET/YES
RESET/NO
†
10 11 12
13 14 15 16
◊
√
ı ∫
1234
5678
9