Sony HSR-1P Security Camera User Manual


 
Chapter 5 Connections and Preparations
Chapter 5 Connections and Preparations 5-7
Settings
When the connections and preparations are completed,
perform the system settings in Enhanced menu mode.
In the following setting procedures, the indications on
the character display on the front panel of the HSR-1/
1P/2/2P are shown in parenthesis after those on the
monitor screen.
Example: IMAGE CONTROL MENU (Image Menu)
Selecting the Enhanced Menu
Mode
1 Enter Menu mode by pressing the MENU key.
The top menu appears on the monitor display.
The Top menu item that had been selected when
you left Menu mode the last time is displayed on
the character display on the front panel.
2 When MENU GRADE (Menu grade) is set to
BASIC (Basic), change it to ENH (Enhanced).
Top menu in Enhanced Menu mode
SETUP MENU
IMAGE CONTROL MENU
INDICATION CONTROL MENU
REC FUNCTION MENU
FUNCTION CONTROL MENU
REMOTE CONTROL MENU
MAINTENANCE MENU
TIME ADJUST
MENU INITIALIZE
MENU GRADE : ENH m
LANGUAGE : ENG
Setting the Cameras to Use
Specify the cameras to be used for monitoring and
recording.
Use CAMERA CONNECTION (CamConnect) of the
Image Control menu for the setting.
To use connected cameras for monitoring and
recording
Set the number of the camera (the same as the VIDEO
IN connector number to which the camera is
connected) to CONNECT.
Setting procedure
1 Highlight IMAGE CONTROL MENU (or display
Image Menu) of the top menu by pressing the V or
v key, then press the b key.
The Image Control menu is displayed.
SETUP MENU
IMAGE CONTROL MENU
A IMAGE
B IMAGE
CAMERA CONNECTION
MONI DISP STRUCTURE
PLAY DISP STRUCTURE
2 Highlight CAMERA CONNECTION (or display
CamConnect) by pressing the V or v key, then
press the b key.
The menu shifts to camera connection setting.
The CONNECT/NO indication for CAM 1 flashes.
CAM 1 CAM 2 CAM 3 CAM 4
CAM 5 CAM 6 CAM 7 CAM 8
CAM 9 CAM 10 CAM 11 CAM 12
CAM 13 CAM 14 CAM 15 CAM 16
CONNECT CONNECT CONNECT CONNECT
CONNECT CONNECT CONNECT CONNECT
CONNECT CONNECT CONNECT CONNECT
NO NO NO NO
3 Select the camera to be set by pressing the b or B
key.
Each time you press either of the key, camera 1 to
16 are cyclically selected, and the CONNECT/NO
indication for the selected camera flashes.
4 Select CONNECT or NO by pressing the V or v
key.
Repeat steps 3 and 4 for all the connected cameras.