Filter
Top Products
You can use a smartphone as the remote controller for this product, and shoot still images. Still
images shot via remote control are sent to the smartphone from the product. The application
PlayMemories Mobile must be installed on your smartphone.
1. MENU → (Application) → [Application List] → [Smart Remote Embedded].
2. When the product is ready for the connection, an information screen appears on the
product. Connect the smartphone and the product using that information.
Connection setting methods differ among smartphones.
3. Check the composition of the image on the smartphone screen, and then press the shutter
button (A) on the smartphone to shoot an image.
Use button (B) to change settings such as [EV], [Self-Timer] and [Review Check].
Note
This product shares the connection information for [Smart Remote Embedded] with a device
that has permission to connect. If you want to change the device that is permitted to connect
to the product, reset the connection information by following these steps. MENU →
(Wireless) → [SSID/PW Reset]. After resetting the connection information, you must register
the smartphone again.
Depending on future version upgrades, the operational procedures or screen displays are
subject to change without notice.
How to Use
Using Wi-Fi functions Controlling this product using a Smartphone
One-touch connection with an NFC-enabled Android