Filter
Top Products
Comp.].
Troubleshooting Troubleshooting Shooting still images/movies
The image is blurred.
Activate the SteadyShot function by pressing the shutter button halfway down and then shoot
images.
The picture was taken in a dark location without the flash, resulting in product-shake. The
use of a tripod or the flash is recommended. [Hand-held Twilight] and [Anti Motion Blur] in
[Scene Selection] are also effective in reducing blur.
Troubleshooting Troubleshooting Shooting still images/movies
The LCD screen darkens after a short period of time
passed.
If you do not operate the product for a certain period of time, the product switches to the
power-save mode. The product exits power-save mode when you perform operations such
as pressing the shutter button halfway.
Troubleshooting Troubleshooting Shooting still images/movies
The flash takes too long to recharge.
The flash has been fired in succession in a short period. When the flash has been fired in
succession, the recharging process may take longer than usual to avoid overheating of the
camera.
Troubleshooting Troubleshooting Viewing images
Images cannot be played back.