Filter
Top Products
1
Charging
the
built-in
battery
~
!Ulation
sheet
~/CHG
lamp
AC Adaptor
Power cord (mains lead)
•
The
battery is bui It in within the
camera.
ORemove
the insulation sheet.
f)connect
the AC Adaptor to the DC IN jack of the camera, making sure the
power is off.
E)Plug
the power cord (mains lead) to a wall outlet (wall socket).
The
~
/CHG
lamp
lights on, and
charging
starts.
When
the
~
/CHG
lamp
turns off,
charging
is finished (Practical charge).
nCharging time
Full
charge
time
Approx.
120
min.
•
Time
required to
charge
a fully
depleted
battery at a
temperature
of
25°C
(77°F).
Charging
may take
longer
under certain
circumstances
or
conditions.
•
See
page 25 for the
number
of
images that can
be
recorded.
•
Connect
the
AC
Adaptor
to an easily
accessible
wall
outlet
(wall socket) close by.
•
Even
if
the
~
/CHG
lamp
is not lit, the AC
Adaptor
is not
disconnected
from the AC
power
source
(mains)
as long as it is
connected
to the wall outlet (wall socket).
If
some
trouble
occurs
while using the
AC
Adaptor,
immediately
shut
off
the
power
by
disconnecting
the plug from the wall outlet (wall socket).
•
If
you
do
not
operate
the
camera
for a long time, disconnect the
AC
Adaptor
from the
DC
IN
jack
of
the
camera
and from a wall outlet (wall socket).
7