Sony NSR Series Security Camera User Manual


 
87
Chapter 5 Settings
FTP:
Enable FTP Server
Select this check box to acquire recorded image files (.cam files) or audio
recording files (.aud files) by FTP.
When this check box is selected, set a password (the user name cannot be
changed). A password must be set the first time this check box is selected.
Note
Changes to the [Date/Time Format] and [RSM Server] settings will take
effect at the next startup.
Caution
When using NTP settings, pay attention to the following:
When performing time synchronization with an NTP server, you must
restart the NSR after selecting the [Synchronize with NTP Server] check
box on the “Main” screen. In addition, the NTP server must be running
normally when the NSR is restarted.
If the NTP settings on the NSR are enabled and DHCP is used to acquire
the NSR address, the NTP server information provided by the DHCP
server on the same network as the NSR is given priority over the NTP
server information set with the NSR.
Once you set the time on the NSR manually, time synchronization with
an NTP server may no longer be possible.
We recommend configuring the NTP settings from the “Main” screen,
even though configuring them from the Setup Menu may sometimes
result in the [Enable NTP Server] check box on the “Main” screen being
selected.
When the [Synchronize with NTP Server] checkbox is cleared, “0.0.0.0”
is entered in the [Address] field.
3
Once you have configured all the desired settings, click [Save] in the upper-
right corner of the window.
The settings are applied.
If you want to ignore all your setting modifications, click [Discard].
Network
You can confirm the network settings for the NSR in “Network.”
Configure the network settings in the System window. Network settings cannot
be configured in “Network”. For details on the System window, see “Modifying
the System Configuration” (page 25).
To display the “Network” screen, click [Network] from the submenus of the
“General” screen.