Filter
Top Products
GB
14 Installing the Camera
the screws are temporarily tightened
properly, securely tighten each one in turn.
For assembly, use only the screws supplied
with the camera. Using other screws may
damage the camera.
4 Insert the protrusions raised on the
ceiling bracket (A) into the spaces
prepared in the ceiling bracket (B),
and temporarily attach them by
pushing the ceiling bracket (A) to the
rear.
5 While pushing up on the front part of
the camera, attach it using the supplied
three screws (
3M 3 × 6), starting with
the screw at position 1.
6 Connect the cables to the connectors
on the rear of the camera.
Take the proper steps to ensure that the
load of the cables connected does not
cause problems.
Note
Ceiling
bracket
(B)
Ceiling
bracket (A)
Ceiling
Note
1
234
5
6
7
89
1
0
3M 3 × 6 (supplied)
Ceiling
1
1
23
4
5
6
7
8
9
1
0
Ceiling