Filter
Top Products
Operating the Camera
Administrator and User
9
Operating the Camera
This section explains how to monitor the image from the
camera using your Web browser.
The functions of the camera should be set by the
Administrator. For the setting of the camera, see
“Administrating the Camera” on page 19.
Administrator and User
This network camera identifies those who log in as the
Administrator or User.
The Administrator can use all the functions of this
network camera, including camera settings. The User
can use the functions for monitoring the image and
audio from the camera, and control the camera. The
Viewer mode setting is used to restrict the user’s access
rights. There are five types of users.
Each type of user can use the corresponding functions below.
z Usable function
– Not usable function
The access rights of the administrator and the user can
be set in “Setting the Security — Security Menu” of the
Administrator menu on page 34.
Function Administrator
User
Full Pan/Tilt Light View
Monitor a live image zzzzz
View the date and time zzzzz
Control the frame rate (JPEG mode only) zz–––
Control the image view size zzzz–
Save a still image and movie in the computer zzzz–
Switch the TCP/UDP transmission mode (Available in
H.264 mode only)
zz–––
Perform the pan/tilt/zoom operation zzz––
Receive audio zzzzz
Select the codec mode zzzz–
Control the setting menu z ––––
Play the recorded file in the memory card zz–––
Delete the recorded file in the memory card z ––––