Filter
Top Products
Operating the Camera
Using the Trigger Button
27
2
Select Day/Night from the trigger drop-down list.
3
Click .
Each click switches the Day/Night function
alternately between On (night mode) and Off (day
mode).
Note
If Day/Night mode in the Trigger-Day/Night menu
(page 72) is set to Auto, you cannot control the Day/
Night function by clicking .
Playing the audio file stored in the
camera
You can play the audio file previously stored in the
camera using the SNC audio upload tool.
To use this function, you need to make Voice alert1,
Voice alert2 and Voice alert3 active in the Trigger menu
of the Administrator menu (page 72).
1
Display the image on the monitor window.
2
Select Voice alert1, Voice alert2 or Voice alert3
from the trigger drop-down list.
3
Click .
Playback of the selected audio file starts and the
playback sound is output from the speaker
connected to the camera.