Filter
Top Products
102
(SETUP 1)
(SETUP 2)
Item Setting Description
LCD
BRIGHTNESS
BRIGHT/
xNORMAL/ DARK
Selects the LCD brightness. This has no effect on the recorded images.
LCD BACKLIGHT BRIGHT/
xNORMAL
Selects the brightness of the LCD backlight. Selecting [BRIGHT] makes the screen bright and easy to
see when using the camera outdoors or in other bright locations, but also uses up the battery charge
faster. Displayed only when you are using the camera with the battery pack. When [POWER SAVE] is
set to [ON], this item cannot be shown.
BEEP SHUTTER
x ON
OFF
– Turns on the shutter sound when you press the shutter button.
– Turns on the beep/shutter sound when you press the control button/ press the shutter button.
– Turns off the beep/shutter sound.
POWER SAVE x ON / OFF Selects whether to use the POWER SAVE mode (page 14). Displayed only when you are using the
camera with the battery pack.
Item Setting Description
FILE NUMBER
x SERIES
RESET
– Assigns numbers to files in sequence even if the “Memory Stick” is changed or the recording folder
is changed.
– Resets the file numbering and starts from 0001 each time the folder is changed. (When the recording
folder contains a file, a number one higher than the largest number is assigned.)
USB CONNECT PTP/xNORMAL Switches the USB mode (page 72).
VIDEO OUT NTSC
PAL
– Sets the video output signal to NTSC mode (e.g., Japan, USA).
– Sets the video output signal to PAL mode (e.g., Europe).
/ LANGUAGE — Displays the menu items, warnings and messages in selected language.
CLOCK SET OK / CANCEL Sets the date and time (page 18).