Filter
Top Products
30
Inserting the date and time on a still image
, Set the MODE dial to SET UP.
The SET UP screen appears.
• When images are shot with the date and time
inserted, the date and time cannot be removed
later.
• When shooting images with the date and time
inserted, the actual date and time are not
displayed on the LCD screen, instead, is
displayed in the upper left portion of the LCD
screen. The actual date and time are indicated
in red in the lower-right corner when the image
is played back.
, Select (CAMERA) with v on
the control button, then press
B.
Select [DATE/TIME] with v/V,
then press B.
, Select the date and time setting
with v/V on the control button,
then press z.
DAY&TIME: Inserts the date and the time
of shooting into the image
DATE: Inserts the year, the month and the
date of shooting into the image
OFF: Does not insert date/time data into the
image
After the setting has been completed, set the
MODE dial to , and continue your shooting.
• When you chose [DATE] in Step 3, the date
will be inserted in the order set in “Setting the
date and time” (page 18).
• You can insert the date and time even when the
MODE dial is set to P
or SCN.
• This setting is maintained even when the power
is turned off.
1
CAMERA
MOVING IMAGE:
DATE/TIME:
RED EYE REDUCTION
:
AF ILLUMINATOR:
MPEG MOVIE
OFF
OFF
AUTO
SELECT
2
CAMERA
MOVING IMAGE:
DATE/TIME:
RED EYE REDUCTION
:
AF ILLUMINATOR:
DAY&TIME
DATE
OFF
OK
3
CAMERA
MOVING IMAGE:
DATE/TIME:
RED EYE REDUCTION
:
AF ILLUMINATOR:
MPEG MOVIE
DATE
OFF
AUTO
PAGE SELECT