Filter
Top Products
13
Getting started
• When charging the battery pack, make
sure the camera is not turned on
(page 16).
• When placing the camera, make sure the LCD
screen is facing up.
• After charging the battery pack, disconnect the
AC power adaptor from the multi connector of
the camera.
To remove the battery pack
Open the battery/“Memory Stick” cover,
and push down the battery eject lever in the
arrow direction as illustrated above.
• Be careful not to drop the battery pack when
removing it.
Battery remaining indicator
The battery remaining indicator shows the
remaining shooting or viewing time.
• When turning the LCD screen off and on, it
takes about one minute to calculate the proper
remaining time.
• A proper remaining time may not be indicated
depending on conditions of use or
circumstances.
Charging time
Approximate time to charge a completely
discharged battery pack using the AC-LM5
AC power adaptor at a temperature of 25°C
(77°F).
Battery life and the number of
images that can be recorded/
viewed
The tables show approximate guidelines for
the length of time the camera can be used
when you shoot in Normal mode in an
environment where the ambient
temperature is 25°C (77°F), and the
supplied battery pack is fully charged. The
guidelines for the number of images that
can be recorded or viewed allow for
changing the “Memory Stick” as necessary.
Actual results may differ slightly from
these, depending on the conditions of use.
Battery eject lever
Battery pack Full charge
(min.)
NP-FC10 (supplied) Approx.150
60
min
2272
8
101