Filter
Top Products
23
Shooting still images
, Press the shutter button fully
down.
The shutter clicks, the shooting is
completed, and the still image is saved in
the “Memory Stick.” When the recording
lamp (page 9) goes out, you can shoot the
next image.
• When you are shooting with the batteries, if no
tasks are performed for a while with the camera
turned on, power is automatically shut off to
preserve battery power (page16).
The position on the mode
selector
When the mode selector is set to , the
functions that can be selected change
according to the (Camera) setting in the
menu settings as follows:
Auto mode shooting [Auto]
You can shoot your subject easily since this
mode automatically adjusts the focus,
exposure, and white balance. In this mode,
(P. Quality) is set to [Fine], the AF
range finder is set to [Multi AF], and the
metering mode is set to multi-pattern
metering (pages 44, 47). The menu items
you can display are limited to (Camera)
and [Mode] (REC Mode).
Program mode shooting [Program]
You can set the shooting functions in the
menu settings according to your shooting
condition.
Twilight mode [ ]
See page 54.
Twilight portratit mode [ ]
See page 54.
Landscape mode [ ]
See page 54.
Snow mode [ ]
See page 54.
Beach mode [ ]
See page 54.
To change the camera mode
1 Set the mode selector to .
2 Press MENU.
3 Select (Camera) with b on the
control button.
4 Select the desired camera mode with v/
V on the control button.
4
VGA
101
97
Mode
Camera
Auto
Program