Filter
Top Products
93
Troubleshooting
Others
You cannot format a
“Memory Stick.”
• The write-protect switch on the “Memory Stick”
is set to the LOCK position.
pSet it to the recording position (page 105).
You have formatted a
“Memory Stick” by
mistake.
• All the data on the “Memory Stick” are erased by
formatting.
pWe recommend that you set the “Memory Stick” write-protect
switch to the LOCK position to protect accidental erasure
(page 105).
Symptom Cause Solution
The camera does not
work, no operations can
be performed.
• The battery level is low or zero (The
indicator appears.).
• The AC Adaptor (not supplied) is not connected
securely.
pCharge the batteries (page 10).
pConnect it securely to the DC IN jack of the camera and to a wall
outlet (wall socket) (page 15).
The power is on, but the
camera does not work.
• The internal system is not working properly. pRemove, and then, after one minute, reinstall the batteries and
turn on the camera. If this does not work, press the RESET
button located inside the jack cover with a pointed object, then
turn the power on again. (This will clear the date and time
settings, etc.)
You cannot identify the
indicator on the LCD
screen.
— pCheck the indicator (pages 109 to 111).
The lens gets fogged. • Condensation is occurring. pTurn off the camera, leave the camera for about an hour and then
try to use it again (page 104).
The camera gets hot if you
use it for a long time.
— pThis is not a malfunction.
The lens does not move
when you turn off the
camera.
• The batteries are discharged. pReplace them with charged batteries or use the AC Adaptor (not
supplied) (pages 10, 12, 15).
Symptom Cause Solution