Filter
Top Products
71
Printing still images
• For DSC-ST80, refer to the operating
instructions “Cyber-shot Station”.
1 Connect the multi connector on
your camera and the USB jack on
the printer with the cable for
multi-use terminal (supplied with
DSC-S90/S80/S60).
2 Turn on your camera and the
printer.
After the connection is made,
the indicator appears
The camera is set to playback mode,
then an image and the print menu appear
on the screen.
Regardless of what the mode dial is set to,
the print menu appears when you complete
Stage 2.
1 Select the desired printing
method with v/V on the control
button, then press z.
[All In This Folder]
Prints all the images in the folder.
[DPOF image]
Prints all the images with a (Print
order) mark (page 73) regardless of the
displayed image.
[Select]
Selects images and prints all the
selected images.
1Select the image you want to print with
b/B, then press z.
The mark appears on the selected
image.
• To select other images, repeat this
procedure.
2Select [Print] with V, then press z.
[This image]
Prints a displayed image.
• If you select [This image] and set [Index] to
[On] in step 2, you can print a set of the
same images as an index image.
2 Select print settings with v/V/b/B.
[Index]
Select [On] to print as an index image.
Stage 2: Connecting the camera
to the printer
Cable for multi-use
terminal/USB
cable
To the USB jack
To the multi
connector
All In
This Folder
DPOF image
Select
This image
Cancel
Print
Stage 3: Printing
OKExit
1
Off
Default
Size
Date
Quantity
Off
Index
Print