Filter
Top Products
85
Troubleshooting
The free capacity of the internal memory does not increase even when you
copy the data stored in the internal memory to a “Memory Stick”.
• The data is not deleted after copying. Execute the [Format] command (page 50) to format the
internal memory after copying the data.
Cannot copy the data stored in the internal memory to a “Memory Stick”.
• The “Memory Stick” is full. Check the capacity.
Cannot copy the data on the “Memory Stick” or the computer to the internal
memory.
• Data on a “Memory Stick” or a computer cannot be copied to the internal memory.
A connection cannot be established.
• The camera cannot be connected directly to a printer that is not compliant with the PictBridge
standard. Consult the printer manufacturer as to whether the printer is compliant with
PictBridge or not.
• Check that the printer is turned on and can be connected to the camera.
• Set [USB Connect] to [PictBridge] in the (Setup) menu (page 54).
• Disconnect and connect the cable for multi-use terminal (DSC-S90/S80/S60) or Cyber-shot
Station (DSC-ST80) again. If an error message is indicated on the printer, refer to the
operating instructions supplied with the printer.
The LCD screen turns off when you connect the camera to the pritner.
• Set [USB Connect] to [PictBridge], and then connect the camera again (page 70).
Cannot print images.
• Check that the camera and the printer are properly connected using the cable for multi-use
terminal (DSC-S90/S80/S60) or Cyber-shot Station (DSC-ST80).
• Turn on the printer. For further information, refer to the operating instructions supplied with
it.
• If you select [Exit] during printing, images may not print. Disconnect and connect the cable
for multi-use terminal (DSC-S90/S80/S60) or Cyber-shot Station (DSC-ST80) again. If you
still cannot print your images, disconnect the cable, turn the printer off and then on, then
connect the cable again.
• Movies cannot be printed.
• Images shot using cameras other than this camera or images modified with a computer may
not be printed.
PictBridge compliant printer