Filter
Top Products
Getting started
11
Charging the battery pack
You cannot charge the battery pack while your camera is turned on. Be sure to turn
off your camera.
After charging the battery pack
Disconnect the AC power adaptor from the DC IN jack on your camera.
Battery remaining indicator
The LCD screen on the camera shows the remaining time for which you can still
record or play back images.
This indication may not be entirely accurate depending on the conditions of use and
the operating environment.
Charging at 10°C to 30°C (50°F to 86°F) circumstances is recommended.
Using your camera abroad
For details, see page 82.
1
Insert the battery pack into your camera.
2
Open the DC IN jack cover and connect the DC connecting cable to
the DC IN jack of your camera with the
v
mark facing up.
3
Connect the power cord (mains lead) to the AC power adaptor and
then to a wall outlet (mains).
The battery indicator flashes when charging begins. When the flashing
stops and the FULL indicator appears in the display window, charging is
completed.
AC-L10A/B/C AC power adaptor (supplied)
DC IN jack cover
To the wall outlet (mains)
Battery pack (M series)
Power cord
(mains lead)