![](http://pdfasset.owneriq.net/f/2e/f2e1f127-cb13-4f65-b44c-b26b8f49c71f/f2e1f127-cb13-4f65-b44c-b26b8f49c71f-bg55.png)
Additional information
85
The flash does not work.
•
The flash is set to .
t
Set the flash to auto (no indicator) or
(page 24).
•
The camera is in one of the following SCENE
SELECTION modes: TWILIGHT or
LANDSCAPE.
t
Cancel the SCENE SELECTION function
(page 51) or set the flash to .
•
The mode dial is set to , SETUP or (MPEG
MOVIE).
t
Set it to .
•
[MODE] (REC MODE) is set to [BURST2] in the
menu settings.
t
Set it to other modes.
The date and time are
recorded incorrectly.
•
The date and time are not set correctly.
t
Set the correct date and time (page 15).
Vertical streaks appear
when you are shooting a
very bright subject.
•
The smear phenomenon is happening.
t
This is not a malfunction.
The battery life is short.
•
You are recording/playing back images under
extremely cold temperatures.
•
The battery pack is not charged enough.
t
Charge the battery pack fully.
•
The battery pack is dead.
t
Replace the battery pack with a new one
(page 81).
The battery remaining
indicator is incorrect.
Or sufficient battery
remaining indicator is
displayed but the power
runs out soon.
•
You have used the camera for a long time in an
extremely hot or an extremely cold location.
•
The battery pack is dead.
t
Replace the battery pack with a new one
(page 81).
•
The battery pack is discharged.
t
Install a charged battery pack (pages 10, 11).
•
A deviation has occurred in the remaining battery
time.
t
Fully charge the battery pack (page 11).
Nothing appears in the
display window or the
indicators flash during
charging.
•
The AC power adaptor is disconnected.
t
Firmly connect the power cord to the wall outlet
(page 14).
•
The battery pack is not installed correctly.
t
Install the battery pack correctly (page 10).
•
Charging is completed.
Symptom Cause and/or Solution