Filter
Top Products
74
Others
Symptom Cause Solution
Your camera does not work.
• The battery level is low. (The E indicator
appears.)
• The USB cable is connected.
p Charge the batteries (page 10).
p Disconnect the USB cable (pages 58 and 65).
The power is on, but the
camera does not work.
• The built-in microcomputer is not working
properly.
p Remove the batteries, then install them again after about one
minute and turn on the camera. If the functions still do not work,
press the RESET button located on the bottom of the camera using
a fine-tipped object, then turn the power on again (page 67). (If
you press the RESET button, all settings including the date and
time are cleared.)
You cannot identify an
indicator on the LCD screen.
— p Check the indicator (pages 87 and 88).
The lens gets fogged.
• Moisture condensation has occurred. p Turn off the camera and leave it for about an hour at the room
temperature for the moisture to evaporate before use (page 81).