Filter
Top Products
82
The screen does not turn on even when the power is turned on.
• Turn on the screen (page 23).
Your camera cannot record images.
• Check the free capacity of the internal memory or “Memory Stick Duo” (page 24). If it is full,
do one of the following:
– Delete unnecessary images (t step 6 in “Read This First”).
– Change the “Memory Stick Duo”.
• You are using the “Memory Stick Duo” with the write-protect switch, and the switch is set to
the LOCK position. Set the switch to the recording position (page 95).
• You cannot record images while charging the flash.
• When shooting a still image, set the mode dial to a position other than .
• Set the mode dial to when shooting movies.
• The image size is set to [640(Fine)] when recording movies. Do one of the following:
– Set the image size to other than [640(Fine)].
– Insert a “Memory Stick PRO Duo” (page 95).
The subject is not visible on the screen.
• Your camera is set to the Playback mode. Press to change to the recording mode (t step
6 in “Read This First”).
Recording takes a long time.
• The NR slow shutter function is activated (page 20). This is not a malfunction.
The image is out of focus.
• The subject is too close. Record in the close-up (Macro) recording mode. Make sure to
position the lens farther away from the subject than the shortest shooting distance,
approximately 2 cm (13/16 inches) (W)/30 cm (11 7/8 inches) (T), when shooting. (
t step 5
in “Read This First”).
• (Twilight mode) or (Landscape mode) is selected in the Scene mode when shooting still
images.
• The Focus preset function is selected. Select the auto focus mode (page 33).
• Refer to “If the subject is out of focus” on page 34.
Optical zoom does not work.
• You cannot change the zoom scale when shooting movies.
Precision digital zoom does not function.
• Set [Digital Zoom] to [Precision] (page 47).
• This function cannot be used while shooting movies.
Shooting still images/movies