Filter
Top Products
101
DCR-DVD92E/DVD202E/DVD203E/DVD403E/DVD602E/DVD653E/DVD703E/
DVD803E 2-587-623-11 (1)
Warning indicators and messages
Self-diagnosis display/Warning
indicators
If indicators appear on the LCD screen or
in the viewfinder, check the following.
Some symptoms you can fix by yourself.
If the problem persists even after you have
tried a couple of times, contact your Sony
dealer or local authorized Sony service
facility.
C:21:00
C:(or E:) : (Self-diagnosis
display)
C:04:
•
The battery pack is not an
“InfoLITHIUM” battery pack. Use an
“InfoLITHIUM” battery pack (p.107).
C:13:
•
The disc is faulty. Use a compatible
disc with your camcorder (p.13).
•
The disc is dirty or has scratches on
it. Clean the disc with the supplied
cleaning cloth.
C:21:
•
Moisture condensation has occurred
with the disc. Turn off your camcorder
and leave it for about 1 hour (p.109).
C:32:
•
Symptoms that are not described
above have occurred. Remove the disc
and insert it again, then operate your
camcorder again.
•
Remove the power source. Reconnect
it again and operate your camcorder
again.
E:20: / E:31: / E:40: /
E:61: / E:62: / E:91: /
E:94:
•
A malfunction that you cannot service
has occurred. Contact your Sony
dealer or local authorized Sony service
facility. Inform them of the 5-digit
code, which starts from “E.”
100-1001 (Warning indicator
pertaining to files)
Slow flashing
•
The file is damaged.
•
The file is unreadable.
(Warning indicator pertaining to
discs)
Slow flashing
•
A disc is not inserted.*
•
Less than five minutes remains for
recording movies.
•
Fewer than 30 images can be
accommodated in the remaining space.
Fast flashing
•
An unrecognizable disc is inserted.*
•
A finalized DVD-RW (VIDEO mode)
or DVD+RW is inserted into your
camcorder when you slide the POWER
switch down repeatedly to light up
(Movie) or (Still).*
•
The disc is fully recorded.*
•
A disc that cannot be read or written is
inserted, such as the single-sided disc
inserted inside out.
•
The disc recorded in the different TV
color system from your camcorder is
inserted.*
You need to remove the disc*
Fast flashing
•
An unrecognizable disc is inserted.
•
The disc is fully recorded.
•
An error might have occurred with the
disc drive in your camcorder.
Troubleshooting