Filter
Top Products
89
DCR-DVD92E/DVD202E/DVD203E/DVD403E/DVD602E/DVD653E/DVD703E/
DVD803E 2-587-623-11 (1)
A problem occurs when the camcorder is connected to the AC Adaptor.
•
Turn off the power, and disconnect the AC Adaptor from the wall socket. Then, connect it
again.
LCD screen/viewfinder
An unknown picture appears on the screen.
•
The camcorder is in [DEMO MODE] (p.64). Touch the LCD screen or insert a disc to cancel
[DEMO MODE].
An unknown indicator appears on the screen.
•
They may be warning indicators or messages (p.101).
The picture remains on the LCD screen.
•
This occurs if you disconnect the AC Adaptor from the wall socket or remove the battery
pack without turning off the power first. This is not a malfunction.
You cannot turn the LCD backlight off.
•
During Easy Handycam operation, you cannot turn the LCD backlight on/off using the
DISP/BATT INFO. Cancel Easy Handycam operation (p.27).
The buttons do not appear on the touch panel.
•
Touch the LCD screen lightly.
•
Press DISP/BATT INFO on your camcorder (or DISPLAY on the Remote Commander:
Except for DCR-DVD92E/DVD602E) (p.22, 41).
The buttons on the touch panel do not work correctly or do not work at all.
•
Adjust the screen ([CALIBRATION]) (p.110).
•
If you change the aspect ratio of the picture, the aspect ratio of the buttons of the touch panel
and indicators will switch to the selected one (p.26, 60).
The picture in the viewfinder is not clear.
•
Extend the viewfinder (p.21).
•
Use the viewfinder lens adjustment lever to adjust the lens (p.21).
The picture in the viewfinder has disappeared.
•
The picture is not displayed in the viewfinder when the LCD screen is open. Close the LCD
screen (p.21).
Troubleshooting