Filter
Top Products
37
DCR-DVD92E/DVD202E/DVD203E/DVD403E/DVD602E/DVD653E/DVD703E/
DVD803E 2-587-623-11 (1)
To cancel, touch [END].
•
You cannot change the zoom speed with the
zoom buttons alongside of the LCD screen.
Recording/playback
To check the remaining battery ......
Set the POWER switch up to OFF (CHG),
and then press DISP/BATT INFO . If
you press this button once, BATTERY
INFO appears on the screen for about 7
seconds. If you keep press and hold the
button for a while, this information is
displayed for about 20 seconds.
Remaining
battery
(approx.)
Recording
capacity
(approx.)
To turn off the operation confirmation
beep .....................................
See [BEEP] (p.68) to set the operation
beep.
To initialize the settings ..............
Press RESET to initialize all the
settings, including settings for date and
time. (Setup items customized on Personal
Menu are not initialized.)
Other part names and functions
Built-in 4CH microphone (DCR-
DVD403E/DVD803E)
When an external microphone (optional)
is connected, it takes precedence over the
internal microphone (p.81).
Built-in stereo microphone (Except for
DCR-DVD403E/DVD803E)
When an external microphone (optional)
is connected, it takes precedence over the
internal microphone (p.81).
Remote sensor (Except for DCR-
DVD92E/DVD602E)
Point the Remote Commander (p.41)
towards the remote sensor to operate
your camcorder.
REC lamp
The REC lamp lights up in red during
recording (p.68).
Speaker
Sounds come out from the speaker.
•
For how to adjust the volume, see page 33.
Recording/Playback