34
DCR-DVD92E/DVD202E/DVD203E/DVD403E/DVD602E/DVD653E/DVD703E/
DVD803E 2-587-623-11 (1)
Functions used for recording/playback, etc.
DCR-DVD403E/DVD803E:
Except for DCR-DVD403E/DVD803E:
Recording
To use zoom ........................
Move the power zoom lever slightly for
a slower zoom. Move it further for a faster
zoom.
Wider range of
view:
(Wide)
Close view:
(Telephoto)
•
Do not remove your finger from the power
zoom lever , when you operate it. If you
do so, the sound of the lever moving may be
recorded.
•
You cannot change the zoom speed with the
zoom buttons alongside of the LCD screen.
•
The minimum distance required between your
camcorder and the subject to get a sharp focus
is about 1cm (about 1/2 inch) for wide angle
and about 80cm (about 2 5/8 feet) for telephoto.
•
You can set [DIGITAL ZOOM] (p.60) if
you want to zoom to a level greater than the
following:
(optical zoom)
DCR-DVD92E/DVD602E/
DVD653E
20
×
DCR-DVD202E/DVD203E/
DVD703E
12
×
DCR-DVD403E/DVD803E
10
×
To record sound with more presence
(5.1ch surround recording)(Except for
DCR-DVD92E/DVD602E) ..........
Using your camcorder, Dolby Digital 5.1
Creater
*
, you can record audio in the 5.1ch
surround sound
**
converting audio input in
4ch microphone.
When you playback the disc on playback
equipment that supports 5.1ch surround
sound, you can enjoy exciting and powerful
sound.
DCR-DVD403E/DVD803E
You can record sound with the internal 4CH
microphone or by attaching an external
microphone (ECM-HQP1)(optional) to the Active
Interface Shoe .
Except for DCR-DVD403E/DVD803E
You can record sound by attaching an external
microphone (ECM-HQP1) (optional) to the
Active Interface Shoe .
For details of the optional microphone,
refer to the instruction manual supplied
with your microphone and [EXT SUR
MIC] (p.66).