Filter
Top Products
93
DCR-DVD92E/DVD202E/DVD203E/DVD403E/DVD602E/DVD653E/DVD703E/
DVD803E 2-587-623-11 (1)
Playing back a disc on your camcorder
You cannot play back a disc.
•
Slide the POWER switch down repeatedly to light up (Play/Edit).
•
Check out the disc compatibility (p.13).
•
Insert a disc with the recording side facing your camcorder (p.24).
•
The disc recorded in other devices may not be played back on your camcorder.
The playback picture is distorted.
•
Clean the disc using the cleaning cloth (supplied, p.5).
“ ” is indicated on an image in the VISUAL INDEX screen.
•
Clean the disc using the cleaning cloth (supplied, p.5).
•
Loading of the data may have failed. It may be indicated correctly when you turn off the
power and then turn it on again, or remove the disc once and set it again.
No sound or only a low sound is heard when playing back a disc.
•
Set [MULTI-SOUND] to [STEREO] (p.65).
•
Turn up the volume (p.33).
•
Sound is not output when the LCD screen is closed. Open the LCD screen.
•
When you record sound with [MICREF LEVEL] (p.66) set to [LOW], the recorded sound
may be difficult to hear.
Playing back a disc on other players
You cannot play back the disc or a disc cannot be recognized.
•
Clean the disc using the cleaning cloth (supplied, p.5).
•
Finalize the disc (p.44).
•
A disc recorded in VR mode cannot be played back on a player that does not support VR
mode. Check the compatibility in the instruction manual of the playback device.
The playback picture is distorted.
•
Clean the disc using the cleaning cloth (supplied, p.5).
“ ” is indicated on an image in the DVD menu.
•
Loading of the data may have failed when finalizing the disc. The DVD menu may be
indicated correctly for a DVD-RW (VIDEO mode)/DVD+RW when you make the disc to
additional recordable condition (p.50) and remake DVD menu by finalizing it again.
Troubleshooting