Filter
Top Products
91
DCR-DVD92E/DVD202E/DVD203E/DVD403E/DVD602E/DVD653E/DVD703E/
DVD803E 2-587-623-11 (1)
The external flash (optional) does not work.
•
The power of the flash is not turned on, or the flash is not attached correctly.
The actual recording time for movie is less than the expected approximate
recording time.
•
When you record an object that moves fast, the time available for recording may shorten
(p.12, 65).
The recording stops.
•
The temperature of your camcorder is extremely high. Turn off your camcorder and leave it
for a while in a cool place.
•
Moisture condensation has occurred with the disc. Turn off your camcorder and leave it
about 1 hour (P.109).
There is a time difference between the point where you press the REC START/
STOP button and the point that the recorded movie starts/stops.
•
On your camcorder, there may be a slight time difference between the point where you press�
the REC START/STOP button and the actual point that recording movie starts/stops. This is
not a malfunction.
Adjusting the image during recording
Refer also to “Setup items” (p.94).
The auto focus does not function.
•
Set [FOCUS] to [AUTO] (p.58).
•
The recording conditions are not suitable for auto focus. Adjust the focus manually (p.58).
[STEADYSHOT] does not function.
•
Set [STEADYSHOT] to [ON] (p.61).
•
[STEADYSHOT] may not work for an excessive camera shake even if [STEADYSHOT] is
set to [ON].
The back light function does not function.
•
The back light function is cancelled when you set [EXPOSURE] to [MANUAL] (p.57) or
select [SPOT METER] (p.56).
•
The back light function does not work during Easy Handycam operation. Cancel Easy
Handycam operation (p.27).
A vertical band appears when recording candlelight or electric light in the dark.
•
This occurs when the contrast between the subject and the background is too high. This is
not a malfunction.
Troubleshooting