Filter
Top Products
Using the Menu
Using the Menu
67
FLASH SET
Note that these settings will not function with external flashes that do not support
the following settings.
FLASH MODE
For DCR-HC65:
b Note
• If the flash is not capable of preventing the red-eye phenomenon, you can select only [ON]
or [AUTO].
FLASH LEVEL
You can select an appropriate flash setting for recording with an external flash
(optional).
b Note
• The setting returns to [NORMAL] when you disconnect the power source from your
camcorder for more than 5 minutes.
REDEYE REDUC
For DCR-HC85:
SUPER NSPLUS
See page 39 for details.
GON Select to trigger the flash (optional) regardless of the
brightness of the surroundings.
ON Select to trigger the flash (optional) regardless of the
brightness of the surroundings. The flash pre-flashes to
reduce the red-eye phenomenon.
AUTO Select to trigger the flash (optional) automatically.
AUTO Select to trigger the flash (optional) automatically. The flash
pre-flashes to reduce the red-eye phenomenon.
HIGH ( ) Select to make the flash level higher than the standard setting.
GNORMAL ( ) Standard setting.
LOW ( ) Select to make the flash level lower than the standard setting.
GOFF Select to disable the red-eye reduction.
ON ( ) Select to activate the flash before recording to prevent red-eye (p. 31).
,continued